CN
RU
Household Combustible Gas Detector
Household Combustible Gas Detectors 6101 Series
Main Features
High sensitivity, anti-interference, resistance to humidity and heat
Audio-visual alarm and automatic output
Automatic reminder of sensor life expiration
Built-in alarm history function
Easy to install and us
Scope of Application
Indoor use in residential homes
Use of The Environment
Relative humidity: ≤93%RH
Ambient atmospheric pressure: 86KPa~106Kpa
Storage Environment
Temperature:-25℃~+55℃
| Detection principle | Semiconductor type |
| Gas types detected | Methane (natural gas), propane (liquefied gas) |
| Alarm setpoint | 8% LEL or 10% LEL |
| Detection range | 0~25% LEL |
| Alarm mode | Sound and light alarm |
| Power supply | AC220V±15% (50Hz) |
| Power | <3W |
| Response time (T90) | ≤30s |
| Detector life | Five years (typical) |
| Installation | Wall-mounted |
| Linkage output (default) | One set of 12v pulse output (solenoid valve) |
| Dimension | 104x68x36mm |
| Model Number | SD6101 Series |
| Product Size | 104x68x36mm |
| Product weight | Approx.105g |
Installation Schematic Diagram
Cautions
Detectors should be installed in areas where indoor gases and vapors tend to collect;
Installation of the detector should refer to the above installation diagram, when the target gas is lighter than the air density, it should be installed above the release source, when the target gas is heavier than the air density, it should be installed below the release source, and the mounting plate should be fixed and leveled in accordance with the shown direction, and the installation should be reliable;
Do not install the detector in the place with large air flow such as ventilation fan, window, door, etc. Avoid installing it in the position directly exposed to heat, water vapor and oil smoke such as directly above the gas stove and smoke extractor;
There should be no obstructions between the detector and the gas-using equipment, and it should not be installed in a closet or cabinet;
Don't install where the power goes out at night;
In newly renovated rooms, detectors should be installed after painting, welding, etc. are completed and air circulation should be maintained after installation;
Do not scrub the detector with alcohol and do not use insecticides to spray directly on the detector to avoid affecting the performance of the sensor;
Do not smoke near the detector;
Unpacking and Inspection
Machine accessories: product manual (1 piece), product certification (1 piece), mounting plate (1 piece), mounting screws accessories (1 piece)
Open the box and check: no scratches on the appearance of the product, the label is complete and clear, and the accessories are complete.